Description

FPO- composite pin insulator

FXBW- composite rod suspension insulator

FS-composite bar crossarm insulator

FZSW- composite rod post insulator

FOX- electrified railway insulator

FCGW- composite dry wall casing

Structure

This series of products are composed of glass fiber epoxy resin drawing rod, silicone rubber umbrella skirt and metal fittings. Its silicone rubber umbrella skirt adopts integral injection and compression technology, thus solving the key problem that affects the reliability of composite insulator -- interface electrical breakdown. Glass pull rods and hardware connection adopt unique binding process, and can adopt domestic most advanced technology, the pressure to equipped with automatic acoustic detection system, high strength, beautiful appearance, small size, light weight, hardware can prevent rust, galvanized are interchangeable with porcelain insulator used, the product structure. reliable and don't damage the mandrel, can give full play to its mechanical strength.

Performance

1.Excellent electrical performance, high mechanical strength, internal load carrying epoxy glass fiber drawing rod tensile bending resistance is 2 times higher than ordinary steel, is 8-1 O times higher than high strength porcelain material, effectively improve the reliability of safe operation.

2. Good anti-pollution performance, strong anti-pollution flashover ability, its wet withstand voltage and pollution withstand voltage is the same climb distance porcelain insulator 2-2.5 times, and does not need cleaning, can be safe operation in heavy pollution areas.

3.Small size, light weight (only 1 /6-1 /19 of the same voltage grade porcelain insulator), lightweight structure, easy to transport

and installation.

4. Silicone rubber umbrella skirt has a good hydrophobic performance, its overall structure to ensure that the internal insulation is

not damp, do not need to carry out preventive insulation monitoring test, do not need to clean, reduce the daily maintenance workload.

5. Sealed performance is good, the electric erosion resistant capability is strong, the umbrella skirt material resistant to tracking of TMA4.5 level, good ageing resistance, corrosion resistance, low resistance, and can be applied to - 40 "C - + 50 "C.

6.It has strong impact resistance and shockproof performance, good anti-brittleness and creep resistance, not easy to break, bending resistance, high torsion strength, can withstand the internal pressure, strong explosion resistance, can be used interchangeabl with porcelain, glass insulator.

7.Composite insulator series products, their mechanical and electrical properties are better than porcelain insulator, running safety margin, is the power line for the renewal of the product.

Model meaning

Composite crossarm insulator

Description

This product is suitable for the technical transformation of urban network, can effectively use the narrow corridor area of the city to boost the power supply, can reduce the height of the tower to save a lot of financial and material resources. Because of its high bending strength, it can prevent the gradation fracture accident which is easy to occur, and it has good pollution resistance.

Technical parameters

Compound dry casing

Description

It is a new type of wall bushing, its internal insulation USES new insulation materials, external

insulation USES high-performance high temperature vulcanized silicone rubber, has excellent pollution resistance and explosion-proof performance. in line with the power sector oil-free, miniaturization development trend, is to meet the urban and rural power grid transformation

requirements of the new generation of high voltage products.

Technical parameters

Composite pin insulator

Description

This product is suitable for high-voltage line facilities. Has good hydrophobic tracking resistance, aging resistance, and electrical erosion resistance, high tensile strength and bending strength of its high mechanical strength, shock resistance, shock and brittle fracture prevention performance is good, weight light, convenient installation, the installation at the top and bottom size the same as the corresponding porcelain needle installation size, can be used interchangeably.

Technical parameters

Composite post insulator

Description

This product is suitable for power station facilities. Has good hydrophobic tracking resistance,

aging resistance, and electrical erosion resistance, high tensile strength and bending strength

of its high mechanical strength, shock resistance. shock and brittle fracture prevention performance is good, light weight, easy installation, the installation at the top and bottom size

with the corresponding porcelain pillar installation size is the same, can be used interchangeably.

Technical parameters

Composite insulators for electrified railways

Description

This product is suitable for electrified railway tunnels with complicated operation conditions, which can effectively prevent pollution flashover accidents and reduce the workload of cleaning and maintenance. Due to its small size. in the tunnel clearance is small, porcelain, glass insulator can not be replaced by the product.